How to Program Philips Universal Remote Cl035a?

Gadgets and devices have come and gone but one type that still stands the test of time is a remote control. It’s absolutely necessary to program your TV. You never know when its replacement pops up in the market with a different name. We won’t be going into that debate for now though.

Do you own a Philips TV and you are having a hard time programming its remote? This guide has you covered. With Philips Universal Remote Control cl035a, you can control up to 5 different devices. C1035a lets you use one remote for these components. Before using this remote, you must program it for each device in your house. For that, you must go through different codes to locate the right one.

To find codes for Philips universal remote cl035a, you may consult the user manual or visit the Philip website.

Philips Universal Remote Code List

How to Program the Universal Remote Control cl035a

Before you program the remote, you must have access to the Philips Universal Remote cl035a codes list. Then, follow the steps below to get started:

Step 1. Turn On Your Device

First of all, turn on the device or TV you will be using with your universal remote.

Step 2. Press the Setup Key

On the remote, you will find a setup key. Hold it until that red light is turned on. This could take up to 5 seconds. Once the light is on, release the button.

Step 3. Press the “Mode” Button

Find the “mode” button on your remote and press it once. While you do that, keep the remote pointed towards your TV or any other device you are programming.

Step 4. Enter the Code

You will now have to enter the code which you found from the list.

All you have to do is point the remote towards the device you want to program and enter the code.  Once you have done that, the red light will turn of. If the light is flashing or blinking, you will have to start over again.

Step 5. Test the Remote

Once you have entered all codes and the red light is off, it is time to test the remote. Test the volume, and change the channels. If the device responds to the buttons pressed, it means you have now successfully programmed your remote.

How to Find the Philips Universal Remote Codes Cl035a?

The 4 or 5 digit code for your device can be found by consulting the instruction manual. For that, open the instruction manual of the remote and flip to its back. There, you will see a table containing brand names and codes. Locate your brand and then lock at the list of the devices in that category. Once you find the device, you will find its code written next to the name as well. Mark the code so that you can find it quickly whenever you need it in the future.

Brands like LG, Samsung and Westinghouse are listed under 20 to 30 codes. Older devices have 4 digit codes whereas new devices have 5 digit codes.

When You Can’t Find the Code In The Manual

If you are unable to find codes for Philips Universal Remote Cl035a in the manual, you can always try the good old Internet search.

Device codes for universal remotes are available online. Simply type the model number of your remote and the words “device codes” and hit enter. You will find your answer. The model number is listed at the back of your remote.

Notes

• If the code entered is valid, the red light will turn off.
• In the code entered is invalid, the red light flashes and then turns off. When that happens, you will have to start over and enter the right code.
• Sometimes, all buttons don’t operate with the equipment. To fix this, try entering another code for your brand.

Benefits Of Having A Universal Remote

Having a universal remote is a lifesaver. You can control several entertainment devices from a single remote. Hence there will be less clutter on your coffee table.

Other than this, having a single remote instead of multiple controls makes it easier to switch between different systems. A universal remote is easy to set up and use as well. By entering the required codes, you will be ready to control different devices.